Submerged Thin Plate Weirs With Unequal Upstream and Downstream Beds
Nalder, G. V. (2006). Submerged Thin Plate Weirs With Unequal Upstream and Downstream Beds (Thesis, Master of Philosophy (MPhil)). The University of Waikato, Hamilton, New Zealand. Retrieved from http://hdl.handle.net/10289/2383
Permanent Research Commons link: http://hdl.handle.net/10289/2383
This thesis describes a short study to examine the behaviour of submerged flow over a thin plate weir with differing upstream and downstream bed levels i.e. an unequal bed weir as opposed to an equal bed weir where the upstream and downstream beds are at the same level. As submerged weir flow is a function of downstream conditions, it was thought that a lower downstream bed would make submerged flow over the weir easier, This is turn suggested that; The shape of the upstream head (Hu) vs downstream head (Hd) graph would change, being initially more steep in the unequal bed case. The Froude Number of the approaching flow would be lower for the unequal bed weir than for an equal bed weir at the same submergence. Using one of the existing submerged flow formula would lead to an erroneous calculated value. A series of measurements was done on two model weirs of different sizes subject to successive levels of submergence. Analysis of the readings of upstream and downstream heads indicated that the difference in bed levels was significant and the three effects above were noted. The work also suggested a new form of equation to calculate flow over a submerged weir. This was looked at briefly.
The University of Waikato
All items in Research Commons are provided for private study and research purposes and are protected by copyright with all rights reserved unless otherwise indicated.
- Masters Degree Theses