=============================================================
Guide to running Matlab scripts and functions on Appendix CD:
=============================================================

Tehani Kuske 2009
-------------------------------------------------------------

Option A: If your CD drive letter is "D":

Step 1:
Start Matlab.

Step 2:
Set the Matlab Current Directory to 'D:\Matlab'

Step 3:
In the command window, enter SF_flux_path and press enter.

Step 4:
You may now run scripts and functions

-------------------------------------------------------------
-------------------------------------------------------------
Table of functions and scripts to plot Thesis figures
-------------------------------------------------------------

\get_SF_G_corr.m\		Fig 3.8

\get_SF_bad_LI7500.m\		Fig 3.9

\SF_LE_H_gf_models_Jan08.m\	Fig 3.10, 3.11 and 3.12

\SF_check_gf.m\			Fig 3.13 and 4.9

\SF_REBS_NR01.m\		Fig 3.14 and 4.4

\footprint_plot.m\		Fig 3.18, 3.19, 3.20 and 3.21

\Energy_bal.m\			Fig 4.1, 4.2, 4.3, 5.3 and 5.4

\SF_closure_winddir.m\		Fig 4.5

\Evap_closure.m\		Fig 4.6, 4.7 and 4.8

\Evap_adj_lys.m\		Fig 4.10, 4.11, 4.12 and 4.13

\SF_radiation_bal.m\		Fig 5.1 and Appendix C

\SF_albedo.m\			Fig 5.2

\ebal_ensembles_SF.m\		Fig 5.5 and Appendix B

\E_bal_running mean.m\		Fig 5.6

\plot_daily_E.m\		Fig 5.8

\Evap_adj.m\			Fig 6.12, 6.13, 6.14 and 6.15

\Evap.m\			Fig 6.1, 6.2 and 6.3

\SF_alpha.m\			Fig 6.4, 6.5, 6.6 and 6.7

\SF_crit_moist.m\		Fig 6.8 and 6.10

\rain_VMC.m\			Fig 6.9

--------------------------------------------------------------	