Browsing by Author "Nadakuduru, Vijay Navaratna"
Now showing items 1-5 of 6
-
High temperature mechanical properties of Ti-47Al-2Cr (at %) alloy produced using powder compact forging of a mechanically milled powder
(IOP Publishing, 2009)Ultrafine grained (UFG) Ti-47Al-2Cr (at %) alloy was prepared using a combination of high energy ball milling of a mixture of elemental powders to produce a Ti/Al/Cr composite powder and forging of compacts of this composite ... -
The mechanical behaviour of an ultrafine grained Ti-47Al-2Cr (at%) alloy in tension and compression and at different temperatures
(Elsevier, 2011)A bulk ultrafine grained (UFG) Ti-47Al-2Cr (at%) alloy has been produced using a powder metallurgy process that combines high energy mechanical milling (HEMM) of a mixture of Ti, Al and Cr powders to produce a Ti/Al/Cr ... -
Mechanical behaviour of Titanium, Ti-6Al-4V (wt %) alloy and Ti-47Al-2Cr (at %) alloy produced using powder compact forging
(Trans Tech Publications, 2011)Powder compact forging was used to produce bulk consolidated titanium and Ti-6Al-4V (wt %) and Ti-47Al-2Cr (at%) alloy disks from hydrogenated and dehydrogenated (HDH) and gas atomised powders (GA) powders (in the case of ... -
Synthesis, microstructure and mechanical properties of bulk ultrafine grained Ti-47Al-2Cr (at%) alloy
(The University of Waikato, 2009)Hot isostatic pressing (HIP) and powder compact forging of Ti/Al/Cr composite powders of composition Ti-47Al-2Cr (at%) have been carried out to synthesize bulk ultrafine grained Ti-47Al-2Cr alloy. The Ti/Al/Cr composite ... -
Tensile properties and fracture behaviour of an ultrafine grained Ti–47Al–2Cr (at.%) alloy at room and elevated temperatures
(Springer, 2012)An ultrafine grained (UFG) Ti–47Al–2Cr (at.%) alloy has been synthesized using a combination of high energy mechanical milling and hot isostatic pressing (HIP) of a Ti/Al/Cr composite powder compact. The material produced ...
