Browsing by Supervisor "Yang, Fei"
Now showing items 1-7 of 7
-
Additive manufacturing of Ti64 alloy in-situ modified with additions of boron or oxygen
(The University of Waikato, 2022)Selective laser melting (SLM) is a metal additive manufacturing process that enables the production of complex, near net shape, parts with fully functional mechanical properties. The use of titanium alloys in SLM is a good ... -
Deformation behaviour and processing of a powder metallurgy metastable beta titanium alloy
(The University of Waikato, 2020)Metastable beta titanium alloys have drawn great attention and became important structural materials in the aeronautical industry thanks to their overall physical and mechanical performance including ultra-high specific ... -
Effect of thermomechanical processing on the mechanical properties of cost-effective powder metallurgy titanium-based materials
(The University of Waikato, 2020)Despite their excellent balance of properties, titanium alloys are still a niche material whose range of applications is limited by the high cost of their manufacturing. With recent developments, powder metallurgy (PM) ... -
Fabrication of advanced heat sink materials by powder metallurgy approach
(The University of Waikato, 2021)To guarantee a safe work environment for high-end chips, electronic packaging materials should have high thermal conductivity, matched coefficient of thermal expansion to semiconductor, low density, good impact toughness, ... -
Investigation on the interface structure and thermal conductivity of hot-forged Cu/(Ti/W-coated)-diamond composites
(The University of Waikato, 2020)Effectively dissipating heat is required for the high-power electronic equipment to ensure the equipment has a safe working environment. Cu/diamond composite is considered as a new generation of heat sink materials because ... -
Study on Low-cost Alternatives for Synthesising Powder Metallurgy Titanium and Titanium Alloys
(University of Waikato, 2017)The aim of this work was to carry out research about cost effective ways for synthesising powder metallurgy Ti and Ti alloys. This was done: using low cost Ti powders produced by the hydrogenation dehydrogenation (HDH) ... -
Turning waste into useful materials: fabrication of titanium alloy matrix composite from the Ti-6Al-4V swarf
(The University of Waikato, 2020)The rapid development of various high-precision technologies in the aerospace, military and civil fields has put forward higher and higher requirements for the performance of materials. Traditional titanium alloys have ...
