Show simple item record  

dc.contributor.authorSalman, Asma Siddiq
dc.contributor.authorGabbitas, Brian
dc.contributor.authorLi, J.
dc.contributor.authorZhang, Deliang
dc.coverage.spatialConference held at Auckland, New Zealanden_NZ
dc.date.accessioned2011-02-23T01:48:45Z
dc.date.available2011-02-23T01:48:45Z
dc.date.issued2009
dc.identifier.citationSalman, A., Gbabitas, B., Li, J. & Zhang, D. (2009). Tribological properties of thermally sprayed TiAl-Al₂O₃ composite coating. IOP Conf. Series: Materials Science and Engineering, 4(1), 012006.en_NZ
dc.identifier.urihttps://hdl.handle.net/10289/5085
dc.description.abstractThe use of thermal spray coatings provides protection to the surfaces operating in severe environments. The main goal of the current work is to investigate the possibility of using a high velocity oxy fuel (HVOF) thermally sprayed wear resistant TiAl/Al2O3 coating on tool steel (H13) which is used for making dies for aluminium high pressure die casting. A feedstock of TiAl/Al2O3 composite powder was produced from a mixture of Al and TiO2 powders by high energy mechanical milling, followed by a thermal reaction process. The feedstock was then thermally sprayed using a high velocity oxy-fuel (HVOF) technique onto H13 steel substrates to produce a composite coating. The present study describes and compares the tribological properties such as friction and sliding wear rate of the coating both at room and high temperature (700°C). The results showed that the composite coating has lower wear rate at high temperature (700°C) than the uncoated H13 sample. At Room temperature without using lubricant there is no much significant difference between the wear rate of the coated and uncoated samples. The experimental results showed that the composite coating has great potential for high temperature application due to its lower wear rate at high temperature in comparison with the uncoated sample at the same temperature. The composite coating was characterized using scanning electron microscopy (SEM), optical microscopy and X-ray diffractometry (XRD). This paper reports the experimental observations and discusses the wear resistance performance of the coatings at room and high temperatures.en_NZ
dc.language.isoen
dc.publisherIOP Publishingen_NZ
dc.relation.urihttp://iopscience.iop.org/1757-899X/4/1/012006en_NZ
dc.subjectengineeringen_NZ
dc.titleTribological properties of thermally sprayed TiAl-Al₂O₃ composite coatingen_NZ
dc.typeJournal Articleen_NZ
dc.identifier.doi10.1088/1757-899X/4/1/012006en_NZ
dc.relation.isPartOfProceedings of the Workshop on Processing, Microstructure and Performance of Materialsen_NZ
pubs.begin-page49en_NZ
pubs.elements-id18868
pubs.end-page53en_NZ
pubs.finish-date2009-04-09en_NZ
pubs.start-date2009-04-08en_NZ


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record