Show simple item record  

dc.contributor.authorFow, Alista Johnen_NZ
dc.contributor.authorDuke, Mikeen_NZ
dc.coverage.spatialQueenstown NZen_NZ
dc.date.accessioned2015-08-27T00:35:49Z
dc.date.available2015-02-17en_NZ
dc.date.available2015-08-27T00:35:49Z
dc.date.issued2015-02-17en_NZ
dc.identifier.citationFow, A. J., & Duke, M. (2015). The Implementation in VISSIM REALTIME of an Active Electromagnetic Damper Controller for Lightweight Electric Vehicles (pp. 6–10). Presented at the The 6th International Conference on Automation, Robotics and Applications (ICARA), Washington DC, USA: IEEE. http://doi.org/10.1109/ICARA.2015.7081117en
dc.identifier.urihttps://hdl.handle.net/10289/9566
dc.description.abstractThe use of linear electromagnetic active damper units in the suspension system of a lightweight electric vehicle offers many advantages over conventional passive, semi-active and active hydraulic dampers. While full active hydraulic systems have been commercially available in automobiles for many years, the linear electromagnetic active damper offers a lower weight system with a much reduced power demand. However an active system requires the use of a controller to adjust the power output to the damper unit. This unit must process signal inputs and provide an output solution within a short time period, often 5 milliseconds or less. By using VISSIM REALTIME, a controller was built that controlled a scale linear electromagnetic damper using Karnopp’s Skyhook algorithm. This had to deal with issues such as accelerometer drift and signal to noise ratio. These required simple but fast techniques to provide useful information to the damper in a useful timeframe. This controller-damper combination proved effective in reducing the vibration experienced by the sprung mass and was more effective than an ideal passive damper at all frequencies tested by at least a factor of three.en_NZ
dc.format.mimetypeapplication/pdf
dc.language.isoen
dc.publisherIEEE
dc.rightsThis is an author’s accepted version of an article published in the Proceedings of 6th International Conference on Automation, Robotics and Applications (ICARA). © 2015 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
dc.sourceThe 6th International Conference on Automation, Robotics and Applications (ICARA)en_NZ
dc.subjectactive
dc.subjectSuspension
dc.subjectmodelling
dc.subjectsimulation
dc.titleThe Implementation in VISSIM REALTIME of an Active Electromagnetic Damper Controller for Lightweight Electric Vehiclesen_NZ
dc.typeConference Contribution
dc.identifier.doi10.1109/ICARA.2015.7081117
pubs.begin-page6
pubs.elements-id128675
pubs.end-page10
pubs.finish-date2015-02-19en_NZ
pubs.place-of-publicationWashington DC, USA
pubs.start-date2015-02-17en_NZ


Files in this item

This item appears in the following Collection(s)

Show simple item record