Bolzoni, LeandroHari Babu, Nadendla2019-01-172018-01-012019-01-172018Bolzoni, L., & Hari Babu, N. (2018). Efficacy of Borides in Grain Refining Al-Si Alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. https://doi.org/10.1007/s11661-018-5017-11073-5623https://hdl.handle.net/10289/12279The grain refining efficacy of titanium, aluminum, and niobium borides, as well as niobium aluminides, introduced via commercial and lab made master alloys on Al-Si alloys was investigated. Significant grain refinement is achieved via the introduction of these heterogeneous nuclei regardless of their chemistry, stoichiometry of the master alloy, and addition rate. However, the grain refinement is affected by variable such as contact time, as the inoculating particle may sediment or be poisoned, and cooling rate. Specifically, a faster cooling rate generally leads to finer grains due to the lower time for grain growth. In the case of borides, the chemical inoculation efficiency is greatly affected by their thermodynamic stability in molten Al-Si alloys. Conversely, the grain refining potency of properitectic Al3Nb remains unaffected. The underlying grain refining mechanism was finally investigated using current models based on the growth restriction factor Q to simultaneously consider the effect of nucleant potency and alloy chemistry. Among Ti-, Al-, and Nb-based borides with similar particle size and distribution, the latter are the most efficient to grain refine Al-Si alloys.application/pdfen© The Author(s) 2018Journal Article10.1007/s11661-018-5017-1