Loading...
Thumbnail Image
Publication

Processing peracetic acid treated bloodmeal into bioplastic

Abstract
Renewable and biodegradable bioplastics can be produced from biopolymers such as proteins. Animal blood is a by-product from meat processing and is rich in protein. It is dried into low value bloodmeal and is used as animal feed or fertiliser. Previous work has shown that bloodmeal can be converted into a thermoplastic using water, urea, sodium dodecyl sulphate (SDS), sodium sulphite and triethylene glycol (TEG). To increase its range of applications and acceptance from consumers, the colour and odour was removed from bloodmeal using peracetic acid (PAA). The aim of this study was to investigate the bioplastic processing of 3-5% (w/w) PAA treated bloodmeal. 3-5% PAA treated bloodmeal powder was compression moulded using different combinations of water, TEG, glycerol, SDS, sodium sulphite, urea, borax, salt and sodium silicate at concentrations up to 60 parts per hundred bloodmeal (pphBM). Partially consolidated extrudates and fully consolidated compression moulded sheets were obtained using a combination of water, TEG and SDS. 4% PAA treated bloodmeal produced the best compression moulded sheets and extrudates and was chosen for investigating the effects of water, TEG and SDS concentration on consolidation, specific mechanical energy input (SME) and product colour during extrusion. Analysis of variance (ANOVA) showed SDS was the most important factor influencing its ability to be extruded because it detangled protein chains and allowed them to form new stabilising interactions required for consolidation. The best extruded sample, which was 98% consolidated and 49% white, contained 40 pphBM water, 10 pphBM TEG and 6 pphBM SDS.
Type
Conference Contribution
Type of thesis
Series
Citation
Low, A., Verbeek, C. J. R. & Lay, M. C. (2012). Processing peracetic acid treated bloodmeal into bioplastic. In Proceedings of Chemeca 2012: Quality of life through chemical engineering: 23-26 September 2012, Wellington, New Zealand. (pp. 1433-1442).
Date
2012
Publisher
Barton, A.C.T. : Engineers Australia, 2012
Degree
Supervisors
Rights
This article has been published in the proceedings of Chemeca 2012: Quality of life through chemical engineering. Used with permission.