Show simple item record  

dc.contributor.authorCao, Peng
dc.contributor.authorQian, Ma
dc.contributor.authorStJohn, David H.
dc.date.accessioned2008-11-19T23:05:30Z
dc.date.available2008-11-19T23:05:30Z
dc.date.issued2006-06
dc.identifier.citationCao, P., Qian, M. & StJohn, D. H. (2006). Effect of manganese on grain refinement of Mg–Al based alloys. Scripta Materialia, 54(11), 1853- 1858.en_US
dc.identifier.urihttps://hdl.handle.net/10289/1407
dc.description.abstractManganese is a grain refiner for high purity Mg–3%Al, Mg–6%Al, Mg–9%Al, and commercial AZ31 (Mg–3%Al–1%Zn) alloys when introduced in the form of an Al–60%Mn master alloy splatter but the use of pure Mn flakes and ALTAB™ Mn75 tablets shows no grain refinement. Long time holding of the melt at 730 °C leads to an increase in grain size. The mechanism is attributed to the presence of an ε-AlMn phase (hexagonal close-packed) in the master alloy splatter.en_US
dc.language.isoen
dc.publisherElsevieren_NZ
dc.subjectMagnesium alloysen_US
dc.subjectGrain refiningen_US
dc.subjectManganeseen_US
dc.subjectSplatteren_US
dc.subjectAlMn intermetallicsen_US
dc.titleEffect of manganese on grain refinement of Mg–Al based alloysen_US
dc.typeJournal Articleen_US
dc.identifier.doi10.1016/j.scriptamat.2006.02.020en_US
dc.relation.isPartOfScripta Materialiaen_NZ
pubs.begin-page1853en_NZ
pubs.editionJuneen_NZ
pubs.elements-id32163
pubs.end-page1858en_NZ
pubs.issue11en_NZ
pubs.volume54en_NZ


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record