Show simple item record  

dc.contributor.advisorZhang, Deliang
dc.contributor.authorZhang, Zhibo
dc.date.accessioned2011-09-20T04:58:13Z
dc.date.available2011-09-20T04:58:13Z
dc.date.issued2011
dc.identifier.citationZhang, Z. (2011). Simulation of Titanium and Titanium Alloy Powder Compact Forging (Thesis, Master of Engineering (ME)). University of Waikato, Hamilton, New Zealand. Retrieved from https://hdl.handle.net/10289/5777en
dc.identifier.urihttps://hdl.handle.net/10289/5777
dc.description.abstractSimulation can be divided into two types: physical simulation and interactive numerical simulation. Physical simulation depends on testing smaller or cheaper samples rather than real objects to simplify models; Interactive simulation, which is also been called numerical simulation is depending on mathematical models and computer program to get the detailed results of the model. In this thesis, 48 compression test samples of sintered powder compacts of pure titanium (HDH) and Ti-6Al-4V were tested by using Gleeble 1500 thermal simulation testing machine. The height reduction of all samples was set as 70% and the other experiment conditions were set as three different temperatures and two strain rates. The stress-strain curves of all samples have been collected in the computer which could be considered as basic for the 3D-FEM simulation. Metal plastic forming is a coupled thermo-stress process in which the workpiece is loaded and restricted in some boundary conditions which include force, temperature, velocity, geometry, friction and so on. Thus, the scientific objective of plastic forming simulation is to be able to predict and control these phenomenon and transformation.The upsetting of powder compacts of pure titanium (HDH) and Ti-6Al-4V (GA) was studied in this thesis based on theoretical and physical models and numerical simulation. Based on the constituent model in ABAQUS and the results of thermo-simulation, the upsetting of 3D-FEM model was built which involved heat transfer, deformation and densification. The temperature field, Mises stress field, strain rate field, strain field and relative density field of pure titanium (HDH) and Ti-6Al-4V (GA) powder compacts were attained. Comparing the density distribution of the metallographic phases in optical microscope with the results of simulation, basically, the experimental results are in general agreement with the results of simulation.
dc.format.mimetypeapplication/pdf
dc.language.isoen
dc.publisherUniversity of Waikato
dc.rightsAll items in Research Commons are provided for private study and research purposes and are protected by copyright with all rights reserved unless otherwise indicated.
dc.subjectTitanium
dc.subjectsimulation
dc.subjectforging
dc.subjectabaqus
dc.titleSimulation of Titanium and Titanium Alloy Powder Compact Forgingen
dc.typeThesis
thesis.degree.grantorUniversity of Waikato
thesis.degree.levelMasters
thesis.degree.nameMaster of Engineering (ME)
dc.date.updated2011-03-15T06:15:34Z
pubs.place-of-publicationHamilton, New Zealanden_NZ


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record